NARROW CLEAN WELD BEAD
Laser Welding Tube Mill Lines
Laser welding gives stainless steel tube a narrow, clean and consistent weld bead with minimal heat input, the preferred route for high-end decorative tube, slotted pipe and square / rectangular tube where weld appearance and post-weld finishing cost matter.
Is laser welding the right weld route for my tube surface quality?
YH laser welding tube mill lines combine a precision forming section with a fiber laser welding unit. Tell us the tube shapes and surface finish you need, and we will propose the line configuration.
- 01Smart Laser Pipe Welding Line: Φ8 – Φ219 mm pipe range, tooling and layout confirmed by YH.
Coil in, pipe out: the five stations
COIL → TUBE · 5 STATIONS
01Uncoil & level
02Breakdown
03Fin pass
04Welding
05Size & cut
Machines in this category
| Image | Machine | Pipe diameter | Wall thickness | Material | Details |
|---|---|---|---|---|---|
| Φ8 – Φ219 mm | 0.3 – 6.0 mm | Stainless steel & carbon steel coil | Specifications → |
Source: YH official product brochure. Final configuration confirmed per project by YH engineers.
Common questions
- Laser welding gives a narrow, clean weld bead with minimal heat input and a depth-to-width ratio up to 10:1 — the preferred route where weld appearance and post-weld finishing cost matter.
- The Smart Laser Pipe Welding Line covers Φ8–219 mm with 0.3–6.0 mm wall.
- Yes. Slotted pipe, square and rectangular tube, and high-end decorative tube are the laser route's typical products.
Laser or TIG welding for my tube?
Which tube sizes does the laser line cover?
Can the laser line weld slotted pipe?
To quote this line, send 5 lines
Send Inquiry- 01Tube shapes: round, square, rectangular or slotted
- 02Tube size range
- 03Material grades
- 04Surface finish your market expects
- 05Planned output, metres per month
Related guide
All guides →
PreviewComparison · 11 min
Laser, TIG or High Frequency: Choosing a Weld Route for Welded Tube
The weld route sets the seam profile, the material you can run and how much post-weld finishing the product needs. A five-check decision list for laser, TIG/plasma and HF — with speed figures only where the brochure publishes them.
PreviewTooling · 10 min
Tube Mill Mould Selection: Steel Grade, Hardness, Tolerance and Service Life
Bore, surface and keyway decide whether a mould runs clean. Work backwards from the finished pipe: family first, then steel grade, hardness and tolerance class — and only then price.
Other equipment
Get a tube mill quotation
Tell us your pipe spec — we will confirm the laser welding tube mill configuration for your product mix.